3308463 - 1040A fuel tank and components (Automatic transmission)

IMMERSED PUMP ASSEMBLY COMPLETE WITH FUEL GAUGE

It basically comprises:

  • electric fuel pump (1)
  • fuel filter (2)
  • float-type fuel gauge sender unit (3)
  • a gauze pre-filter (4).

Ekp 13.5 electric fuel pump

The fuel pump comprises a permanent-magnet electric motor (1) which controls the pump impeller (2), and a terminal-carrier cover (3), which contains the electrical and hydraulic connections.The pump stage is of the single type with peripheral flow, with high performance under low voltage and temperature conditions.

Its advantages compared with pumps operating in accordance with the positive-displacement principle are:

  • light weight
  • small size.

Specifications:

  • Capacity [sup3 ] 110 l/h
  • Pressure 4 bar
  • Voltage 12 V
  • Current £ 7.5 A

INERTIA SWITCH

In the event of a crash, the inertial switch, mounted under the driver's seat, breaks the fuel pump's connection to earth and consequently the supply to the fuel injection system.
A steel ball (1) mounted in a conical housing (2) is normally locked by the attraction force of an adjacent magnet.Under specific acceleration loads, the ball is released from the magnetic lock and gradually emerges from the conical housing in an upward movement, following the angle of the cone.Above the ball, there is a quick-trip mechanism (3) which forms the normally closed (N.C.) electric circuit.When the mechanism is struck by the ball, it changes position from N.C. circuit to normally open (N.O.), breaking the fuel pump's earth circuit.The switch can be reset by pressing a button protected by a soft cover (4).
After a crash, even if minor, if a smell of combustion or fuel leaks are perceived, do not reset the switch, but seek the cause of the fault and eliminate it, in order to avoid risks of fire.
Otherwise, if there are no leaks and the vehicle can be restarted, press the button to reactivate the pump.