1008C14 ENGINE LINK BRACKET - R R (AUTOMATIC TRANSMISSION) - Alfa - 166 - eLearn

3314214 - 1008C14 engine link bracket - r r (Automatic transmission)

) Remove the right head driven pulley hub (refer to op. 1036D58 front seal of r/h overhead camshaft - r + r ). 1. Undo the bolts (1a) and remove the left head driven pulley (1b).

- 1008C10 power unit upper reaction link r r . 1. Undo the bolts (1a) and remove the right rear protective timing cover (1b).2. Undo the bolts (2a) and remove the left rear protective timing cover (2b).

1. Undo the bolt (1a) and move the cam angle sensor (1b) away from the bracket on the engine for the reaction rod.

1. Undo the nuts (1a) and remove the bracket on the engine for the reaction rod (1b).

Refitting ( Removing

) 1. Fit the bracket on the engine for the reaction rod (1a) and fix it tightening the nuts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Nut	REACTION LINK BRACKET ON ENGINE	M10	Cylinder head side 4.3 - 5.3

Place the cam angle sensor back in its housing and fix it using the bolt to the bracket on the engine for the reaction rod.Fit the left rear protective timing cover and fix it using the bolts.Fit the right rear protective timing cover and fix it using the bolts.Fit the left head driven pulley and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	TIMING GEAR DRIVEN PULLEYS	-	Hub side -

Fit the right head driven pulley hub (refer to op. 1036D58 front seal of r/h overhead camshaft - r + r ).