3314280 - 1084B23 oil pump control return - r r (Automatic transmission)

Removing ( Refitting )  - 7040D12  engine front side cover (one) lh or rh - r r (right and left).  - 7040D30  engine bay front beam cover - r r .  - 7040D14  engine bay rear side cover (one) lh or rh - r r (right and left).  - 4450B10  Front WHEEL (one) - R.R. (right).  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (right and left).  - 7055A43  central front grille - r r .  - 7055A41  RIGHT FRONT GRILLE - R.R. .  - 7055B10  Front BUMPER - R.R. .  - 7055B54  under-engine guard - r r .  - 1076B70  exhaust pipe between pre-catalytic converter and catalytic converter - r r .  - 1064A48  sleeve connecting rh exhaust manifold and turbocharger flange - r r and replace gaskets .  - 2710A31  intermediate drive shaft - r r .  - 1092G10  single engine belt r r .  - 1092G20  engine component single belt fixed tensioner - one - r + r .  - 1008C10  power unit upper reaction link r r .  - 1008C16  body link bracket - r r .  - 1008A44  rear rigid mount - r r .  - 1020A20  crank case oil sump - r + r clean seals for sealant application . 1. Fit the crankshaft lock.

NameCountry
1Counter-torque for crankshaft1.870.646.000
2. Undo the bolt fixing the chain drive to the engine oil pump.3. Undo the nut securing the crankshaft pulley.
1. Release the chain drive (1a) from the engine oil pump using the tool (1b).

NameCountry
1bExtractor1.860.954.001
Remove the crankshaft lock.

NameCountry
-Counter-torque for crankshaft1.870.646.000
Remove the crankshaft drive pulley.1. Undo the alternator bracket lower bolt.2. Remove the drive pulley.3. Undo the bolts (3a) and remove the crankshaft front cover (3b) complete with oil seal.Remove the seal.
Release and remove the oil pump drive chain and sprockets. Refitting ( Removing ) Place the oil pump drive chain and sprockets back in their housing.Remove the oil seal from the crankshaft front cover.Fit the crankshaft front cover, complete with a new gasket, and fix it tightening the bolts to the recommended torque.

FasteningComponentØValue(daNm)
-BoltCRANKSHAFT FRONT COVERM6Engine crankcase side 0.7 - 0.9
1. Fit the crankshaft front oil seal (1a) using the tool (1b).

NameCountry
1bFitting tool1.860.949.000
Fit the drive pulley.Fit the alternator bracket bottom bolt.Place the crankshaft pulley back in its housing.Fit the crankshaft lock.

NameCountry
-Counter-torque for crankshaft1.870.646.000
Tighten the nut securing the crankshaft pulley to the specified torque.

FasteningComponentØValue(daNm)
-NutCRANKSHAFT PULLEYM28Crankshaft side 20.0 - 24.7
Place the chain drive back in its housing on the oil pump and fix it tightening the bolt to the recommended torque.

FasteningComponentØValue(daNm)
-BoltENGINE OIL PUMP DRIVE CHAINM10Engine oil pump side 4.3 - 5.3
Remove the crankshaft lock. - 1020A20  crank case oil sump - r + r clean seals for sealant application .  - 1008A44  rear rigid mount - r r .  - 1008C16  body link bracket - r r .  - 1008C10  power unit upper reaction link r r .  - 1092G20  engine component single belt fixed tensioner - one - r + r .  - 1092G10  single engine belt r r .  - 2710A31  intermediate drive shaft - r r .  - 1064A48  sleeve connecting rh exhaust manifold and turbocharger flange - r r and replace gaskets .  - 1076B70  exhaust pipe between pre-catalytic converter and catalytic converter - r r .  - 7055B54  under-engine guard - r r .  - 7055B10  Front BUMPER - R.R. .  - 7055A41  RIGHT FRONT GRILLE - R.R. .  - 7055A43  central front grille - r r .  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (right and left).  - 4450B10  Front WHEEL (one) - R.R. (right).  - 7040D14  engine bay rear side cover (one) lh or rh - r r (right and left).  - 7040D30  engine bay front beam cover - r r .  - 7040D12  engine front side cover (one) lh or rh - r r (right and left).