3314285 - 1088C36 thermostat support - r + r (Automatic transmission)

Removing ( Refitting )  - 7040D12  engine front side cover (one) lh or rh - r r (left).  - 7040D14  engine bay rear side cover (one) lh or rh - r r (left).  - 1048B44  heat exchanger/manifold pipe - r r .  - 7055B54  under-engine guard - r r .  - 1088C40  thermostat- r + r . 1. Disconnect the electrical connection from the engine coolant temperature sensor.

	Name	Connector
1	Engine coolant temperature sensor-sender unit	K36

Loosen the band on the connecting hose between thermostat support and left cylinder head.2. Disconnect the coolant supply pipe to the turbocharger from the thermostat support.3. Disconnect the coolant supply hose from the thermostat to the rigid inlet pipe to the water pump, thermostat side.4. Undo the bolts (4a) and remove the thermostat support (4b). Refitting ( Removing ) Fit the termostat support and fix it, tightening the bolts (1c) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1c	Bolt	THERMOSTAT MOUNT	M8	Cylinder head side 0.7 - 0.9

Connect the coolant supply hose from the thermostat to the rigid inlet pipe to the water pump, thermostat side.Connect, to the thermostat support, the coolant supply pipe to the turbocharger.Tighten the band securing the connecting hose between thermostat and left cylinder head.Connect the electrical connection to the engine coolant temperature sensor. - 1088C40  thermostat- r + r .  - 7055B54  under-engine guard - r r .  - 1048B44  heat exchanger/manifold pipe - r r .  - 7040D14  engine bay rear side cover (one) lh or rh - r r (left).  - 7040D12  engine front side cover (one) lh or rh - r r (left). Supply the engine cooling system with the recommended fluid.

	Type	Component	Name	Qty.
-	Fluid [l]	ENGINE COOLING CIRCUIT	Alfa Romeo Climafluid Super Permanent -40°C	10.5