3313988 - 0010K40 40,000km service coupon, emission control versions

Position the vehicle on the ramp.Check that the tyre treads are not unevenly worn.

Some types of tyres are fitted with wear indicators; they have to be replaced as soon as these indicators become visible.

Do not cross-interchange the tyres.

Check that the tyre pressures are correct, including the spare tyre.

The tyre pressures should be checked on cold tyres.

Earth the front brake pad wear indicator cable.Turn the ignition on (MAR).Press the brake pedal and check that the front brake pad wear warning light comes on. Visually check the state of wear of the rear brake pads.Raise the vehicle and check that the rubber gaiters on the drive shafts and power steering and the balljoint caps are not friction damaged or broken.Check that there are no leaks from the brake and fuel pipes/connectors.

Visually check

• bodywork exterior
• underside protection (exhaust, fuel and brake pipes)
• rubber components (dust excluders, hoses, bushes, etc.).

Carry out Op.   3380A04  handbrake - check travel . Carry out Op.   1036H10  valve tappets - check and adjust clearance . Carry out Op.   1080A12  idling co level - check using special equipment and adjust speed . Carry out Op.   1048A14  air cleaner filtering element - replace. .

Check and if necessary top up the following fluid levels:

• brake and clutch,
• power steering,
• windscreen wiper,
• battery,
• engine coolant
• etc.

Carry out Op.   5510D10  spark plugs - r+r . Connect the EXAMINER or other diagnostic instruments to the diagnostic socket (select the control unit in question). Check the plausibility of all the parameters and if necessary carry out the available active diagnoses. Carry out Op.   0010T12  engine oil and filter replace . Carry out Op.   5010B09  purifying filter (antipollen) filter element - replace .