5540C40 MOTOR (1), LH OR RH, FOR CORRECTING/ALIGNING GAS DISCHARGE LIGHT UNIT R R - Alfa - 166 - eLearn

3314890 - 5540C40 motor (1), lh or rh, for correcting/aligning gas discharge light unit r r

) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

- 7040D12 engine front side cover (one) lh or rh - r r . 1. Disconnect the electrical connection from the exhaust gas light cluster alignment motor.

	Name	Connector
1	Left headlamp alignment corrector motor	N30

	Name	Connector
1	Right headlamp alignment corrector motor	N31

1. Rotate in an anti-clockwise direction and remove the exhaust gas light cluster alignment motor.

Refitting ( Removing

) Place the exhaust gas light cluster alignment motor back in its housing, check that the pin is correctly attached to the parabola and rotate it in a clockwise direction to secure it.Connect the electrical connection to the exhaust gas light cluster alignment motor. - 7040D12 engine front side cover (one) lh or rh - r r . Connect the negative (-) battery terminal.