5580C22 AIR BAG MODULE - PASSENGER SIDE - R.R. - Alfa - 166 - eLearn

3314932 - 5580C22 AIR BAG MODULE - Passenger side - R.R.

Before removing and refitting the control unit, carry out the following preliminary operations:place the ignition key in the OFF position and extract it;disconnect and insulate the battery leads;wait for 10 minutes before continuing.

Follow the safety instructions (see 5080C - Warnings).

Removing ( Refitting

) - 7040A67 partition between passenger airbag and facia compartment - r r . - 7040A31 flap assembly - r r . 1. Disconnect the electrical connection for the passenger Air Bag module after having releaed it from the anchorage devices.

	Name	Connector
1	Air Bag in dashboard (passenger side)	Q11

2. Undo the bolts (2a) fixing the passenger Air Bag module (2b), then remove it after having released it from the two attachments.

Place the Air Bag module in the special cupboard, resting it on a free surface with the bag facing upwards.

Refitting ( Removing

)

Follow these precautions:handle the Air Bag module with extreme caution;make sure that the battery is disconnected.

If the Air Bag module is being replaced, remove the removable part of the adhesive label from the new module and place it in a special file containing the vehicle details (model, registration date, chassis number) and the serial number of the old module. This file should be kept for future checks.A new adhesive label is supplied together with the Air Bag module to be stuck on top of the one present on the driver's door pillar.It must be perforated first by the month, 10 years after the year in which the module is fitted (e.g. for 1998, this will be 2008).

1. Place the passenger Air Bag module (1a) back in its housing, fixing it to the two attachments, then fix it tightening the bolts (1b) to recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	PASSENGER AIR BAG MODULE	M6	0.6 - 0.8

2. Connect the electrical connection to the passenger Air Bag module and fix the wiring to the anchorage devices.

- 7040A31 flap assembly - r r . - 7040A67 partition between passenger airbag and facia compartment - r r . Connect the battery terminals.Check the operation of the system using the Examiner or the other diagnostic equipment.