5530A14 ALTERNATOR - R+R FOR VERSIONS WITH AIR CONDITIONER - Alfa - 166 - eLearn

3314858 - 5530A14 alternator - r+r for versions with air conditioner

) Position the vehicle on the ramp. Ensure that the ignition key is in the stop OFF, then disconnect the battery negative terminal - 5530B10 battery - r+r .

	Name	Connector
-	Battery	A1B

Proceed with the removal - 7055B54 under-engine guard - r r . Proceed with the removal - 1084B30 engine oil filter r r . Proceed with the removal - 4450B10 Front WHEEL (one) - R.R. (right). Proceed with the removal - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. (right). Proceed with the removal - 1092G10 single engine belt r r . Proceed with the removal - 1092G20 engine component single belt fixed tensioner - one - r + r . 1. Undo the nut (1a) and disconnect the right power steering box rod (1b) from the front vertical link using the tool (1c).

	Name	Country
1c	Extractor	1.821.169.000

1. Release the A.B.S. sensor cable from the mounting bracket.2. Undo the bolt (2a) and remove the A.B.S. cable mounting bracket (2b).3. Undo the nut (3a) and move the front right anti-roll bar joint (3b) aside.

1. Remove the plastic protection, undo the nuts (1a), then disconnect the electrical connections (1b) and (1c) from the alternator.

	Name	Connector
1b	Alternator	A10A

	Name	Connector
1c	Alternator	A10B

2. Undo the bolts (2a) and remove the alternator (2b).

Refitting ( Removing

) 1. Place the alternator (1a) back in its housing and fix it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	ALTERNATOR ASSEMBLY	M8	(Mounting bracket side) 1.9 ÷ 2.3

UP TO MARCH 20001. Connect the electrical cables (1a) and (1b) to alternator terminals B+ and D+, respectively.

The terminal for the cable (1a) connected to terminal B+ should be positioned vertically on the alternator cover towards terminal D+.

	Name	Connector
1a	Alternator	A10A

	Name	Connector
1b	Alternator	A10B

2. Secure the leads with bolts.

UP TO MARCH 20001. Fit the protective cover for terminal B+.

Make sure that the protection is properly closed and that the alternator cables are correctly positioned as illustrated in the figure.

FROM MARCH 20001. Connect the electrical cables (1a) and (1b) to alternator terminals B+ and D+, respectively.

The terminal for cable (1a) connected to terminal B+ should be positioned downwards on the alternator cover.

	Name	Connector
1a	Alternator	A10A

	Name	Connector
1b	Alternator	A10B

2. Secure the leads with bolts.

FROM MARCH 20001. Fit the protective cover for both terminals B+ and D+.

Make sure that the protection is properly closed and that the alternator cables are correctly positioned as illustrated in the figure.

1. Place the right front anti-roll bar joint (1a) back in its housing and fix it tightening the nut (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Nut	FRONT ANTI-ROLL BAR JOINTS	M10	(Shock absorber fork side) 3.8 ÷ 4.7

2. Fit the A.B.S. cable mounting bracket (2a) and fix it using the bolt (2b).3. Fix the A.B.S. sensor cable to the mounting bracket.

Connect the right power steering box rod to the front vertical link and fix it tightening the nut to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	ADJUSTABLE STEERING LINKS	M10	(Front wheel hub steering knuckle side) 4.3 ÷ 4.7

Proceed with the refitting - 1092G20 engine component single belt fixed tensioner - one - r + r . Proceed with the refitting - 1092G10 single engine belt r r . Proceed with the refitting - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. (right). Proceed with the refitting - 4450B10 Front WHEEL (one) - R.R. (right). Proceed with the refitting - 1084B30 engine oil filter r r . Proceed with the refitting - 7055B54 under-engine guard - r r . Connect the battery terminal (-).Remove the car from the ramp.