W10 BLACK EXHAUST FUMES - Alfa - 166 - eLearn

3308740 - W10 BLACK EXHAUST FUMES

There are a great deal of exhaust fumes, with dark coloured smoke;

0	PRELIMINARY CHECKS	All OK	Problems met	Operation
		Results of the tests
	Check whether the problem is connected with oil consumption	Continue to Step 1	Excessive oil consumption	See table X05
1	CHECKING AIR CIRCUIT	All OK	Problems met	Operation
	Verify: the state of the air filter the condition and seal of the air supply circuit	Continue to Step 2	Circuit component damaged	Replace component (See Assembly 1048A)
2	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect diagnostic equipment (Examiner or other instruments) to the diagnostic socket.Check that there are no faults in the engine management control unit	Continue to Step 3	An error is detected in the control unit	Continue following the instructions for the diagnostic equipment
		Continue to Step 3	Lack of dialogue with the control unit	Restore connection between the engine management control unit and the diagnostic connector ( See E5030 PETROL ENGINE ELECTRONIC MANAGEMENT ).
3	ACTIVE DIAGNOSIS WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Using the diagnostic equipment (Examiner or other instruments) carry out the active diagnosis of the injectors.	Continue to Step 4	Injector connections faulty	Restore the connection of the injectors with the control unit, ( See E5030 PETROL ENGINE ELECTRONIC MANAGEMENT )
		Continue to Step 4	Injectors faulty	Replace injectors Op. 1056B70
4	CHECKING FUEL PRESSURE	All OK	Problems met	Operation
	Check the fuel supply pressure Op. 0510C10	Continue to Step 5	Pressure not correct	Replace the fuel pump assembly Op. 1040A70
5	HECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Search for the fault starting from another symptom'