3315090 - 7010E52 rear door front pillar trim - r r

Removing ( Refitting )  - 7065C42  ashtray (one) r+r - 7010C44  interior handle panel - r r - 7010E38  rear side door interior handle-r r - 7040E26  lower courtesy light in rear panel - r r - 7010E10  rear side door inner panel - r r or replace - 7010A04  rear side door water guard protection - r r or arrange with door panel removed1. Undo the clip retaining the window to to the electrically-operated window device and remove the plastic pin.2. Lower the window inside the door and prise out the vertical section of the glass slide channel.3. Unscrew the three bolts (3a) retaining the outer trim (3b) and remove from the door together with the sealing strip. Refitting ( Removing ) Check the trim is in good condition.Position the outer trim and check it is fitted correctly in relation to the bolt holes.Tighten the outer trim retaining bolts.Fit the vertical section of the slide channel. Fit the window to the locating pin and connect the retaining clip.Check the device is working properly by raising and lowering the window.  - 7010A04  rear side door water guard protection - r r or arrange with door panel removed - 7010E10  rear side door inner panel - r r or replace - 7010C44  interior handle panel - r r - 7065C42  ashtray (one) r+r - 7010E38  rear side door interior handle-r r - 7040E26  lower courtesy light in rear panel - r r