3314025 - 0520G15 compression test with sdc with spark plugs or injectors removed

1. Disconnect the motor's main electrical connection.

	Name	Connector
1	Data not available yet	-

2. Fit the "EXAMINER 50 bar probe" and "EX8 adaptor" in the seat of a spark plug.3. Connect the diagnostic station.Via the starter motor, make the engine execute a few revolutions while holding down the accelerator and clutch pedals.

Make sure that there are no leaks from the test instrument's connection.

Repeat the test on the remaining cylinders.Check that the cylinders' pressure readings do not differ excessively. Connect the motor's main electrical connection.