3314598 - 3340B52 pump/central obs pipe - r r

Removing ( Refitting ) Position the vehicle on the lift. Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

NameConnector
-Battery  A1B 
 - 7040D12  engine front side cover (one) lh or rh - r r (left).  - 7040D14  engine bay rear side cover (one) lh or rh - r r (left).  - 3340A12  A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. .  - 3340A13  abs central mount - r r .  - 1088B12  engine coolant reservoir mount - r r . 1. Disconnect the wiring connector for the front left wheel speed sensor.

NameConnector
1Left. front wheel sensor for ABS  K70 
2. Undo the bolts (2a) and disconnect the earths (2b) and (2c) from the bodywork.

NameConnector
2bData not available yet-

NameConnector
2cData not available yet-
3. Disconnect the flexible pipes from the brake fluid reservoir to the master cylinder, master cylinder side.4. Release the brake pipes from the retaining clip.
1. Disconnect from the master cylinder and remove the rigid pipe from the master cylinder to the A.B.S. hydraulic control unit.
Refitting ( Removing ) Refit in its seating the rigid pipe from master cylinder to hydraulic control unit.Connect the rigid pipe from master cylinder to hydraulic control unit and tighten the connector to the specified torque.

FasteningComponentØValue(daNm)
-ConnectorPIPE FROM PUMP TO HYDRAULIC CONTROL UNITM10Brake master cylinder side 1.2 - 1.5
Secure the brake pipes to their clips.Connect the flexible pipes from brake fluid reservoir to master cylinder, master cylinder side.Connect the earths and secure with their bolts to the bodywork.Connect the electrical connection for the front left wheel speed sensor. - 1088B12  engine coolant reservoir mount - r r .  - 3340A13  abs central mount - r r .  - 3340A12  A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. .  - 3330A14  HYDRAULIC BRAKING SYSTEM - Bleed air .  - 7040D14  engine bay rear side cover (one) lh or rh - r r (left).  - 7040D12  engine front side cover (one) lh or rh - r r (left). Connect the negative (-) battery terminal.Remove the vehicle from the ramp.