3315173 - 7040A15 facia flap lock barrel

It is not possible to order a single lock barrel or to order barrels using a single part code.When ordering barrels, observe the special procedure set out in op.5580E - Special Accessories.

Removing ( Refitting ) Open the compartment flap.Insert the key in the lock barrel.1. Working through hole (1a) in the compartment trim, use an appropriate tool to pull up clip (1b) retaining the lock barrel slightly without deforming it.2. Remove the lock barrel from its housing. Refitting ( Removing ) Fit a new barrel.Check that the clip is engaged.Check operation.