3314107 - 1048A14 air cleaner filtering element - replace. (Automatic transmission)

Removing ( Refitting ) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

NameConnector
-Battery  A1B 
 - 7040D12  engine front side cover (one) lh or rh - r r (left)  - 7040D14  engine bay rear side cover (one) lh or rh - r r (left)  - 1048A28  vacuum air circuit resonator pipe - r+r . 1. Disconnect the electrical connection from the air flow meter.

NameConnector
1Air flow meter  K41 
2. Undo the bolts (2a) and remove the air filter cover (2b) complete with air flow meter (2c).3. Remove the air duct.4. Remove the air filter filter element.
Refitting ( Removing )
Before fitting a new filter element, remove any impurities in the filter casing (by suction) that could fall into the clean air section of the circuit. Take care to position the filter element correctly so that the seal is in its housing and is not cut or damaged.
Fit a new air filter filter element.Fit the air duct.Fit the air filter cover complete with air flow meter and fix it using the bolts.Connect the electrical connection to the air flow meter. - 1048A28  vacuum air circuit resonator pipe - r+r .  - 7040D14  engine bay rear side cover (one) lh or rh - r r (left)  - 7040D12  engine front side cover (one) lh or rh - r r (left) Connect the negative (-) battery terminal.