1056B51 CAM ANGLE SENSOR R + R (AUTOMATIC TRANSMISSION) - Alfa - 166 - eLearn

3314121 - 1056B51 cam angle sensor r + r (Automatic transmission)

) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection for the cam angle sensor and release the wiring from the securing bands.

	Name	Connector
1	Cam angle sensor	K47

2. Undo the bolt (2a) and remove the cam angle sensor (2b).

Refitting ( Removing

) Fit the cam angle sensor and fix it using the bolts.Connect the electrical connection for the cam angle sensor and fix the electrical wiring to the bands. - 1048A48 throttle heater sleeve - r r . - 7040D14 engine bay rear side cover (one) lh or rh - r r (left). - 7040D12 engine front side cover (one) lh or rh - r r (left). Connect the negative (-) battery terminal.