1084A40 ENGINE OIL LEVEL SENSOR - R + R (AUTOMATIC TRANSMISSION) - Alfa - 166 - eLearn

3314176 - 1084A40 engine oil level sensor - r + r (Automatic transmission)

) Position the vehicle on the lift. Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection for the engine oil level sensor.

	Name	Connector
1	Engine oil level sensor	K32

- 7055B54 under-engine guard - r r . 1. Undo and remove the engine oil level sensor.

Refitting ( Removing

) Fit the engine oil level sensor and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ENGINE MOUNT TIMING SIDE	M12 x 1.25	4.5 - 6.5

- 7055B54 under-engine guard - r r . Connect the electrical connection to the engine oil level sensor.Connect the negative (-) battery terminal.Remove the vehicle from the ramp.