3314318 - 1076A72 heat shield for right catalytic preconverter r r (Automatic transmission)

Removing ( Refitting ) Place the vehicle on a ramp. Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (  - 5530B10  battery - r+r ).

NameConnector
-Battery  A1B 
Proceed with the removal  - 7040D12  engine front side cover (one) lh or rh - r r (Right and left sides). Proceed with the removal  - 7040D14  engine bay rear side cover (one) lh or rh - r r (Right side). Proceed with the removal  - 7040D30  engine bay front beam cover - r r . Proceed with the removal  - 4450B12  front or rear wheels (two) - r+r . Proceed with the removal  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (Right and left sides). Proceed with the removal  - 7055B54  under-engine guard - r r . Proceed with the removal  - 1080B39  right catalytic preconverter r r or replace cylinder head gasket . 1. Undo the bolts (1a) and separate the right catalytic converter heat shield (1b) from its preconverter.
Refitting ( Removing ) Assemble the right catalytic preconverter heat shield to the preconverter and secure with bolts. Proceed with the refitting  - 1080B39  right catalytic preconverter r r or replace cylinder head gasket . Proceed with the refitting  - 7055B54  under-engine guard - r r . Proceed with the removal  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (Right and left sides). Proceed with the refitting  - 4450B12  front or rear wheels (two) - r+r . Proceed with the refitting  - 7040D30  engine bay front beam cover - r r . Proceed with the refitting  - 7040D14  engine bay rear side cover (one) lh or rh - r r (Right side). Proceed with the removal  - 7040D12  engine front side cover (one) lh or rh - r r (Right and left sides). Connect the battery terminal (-). Proceed with the refitting  - 1056B81  run electronic ignition/injection control unit (single) self-learning procedure . Remove the car from the ramp.