3314481 - 2110C22 gear input shaft seals - r r
Removing
(
Refitting
)
- 7040D12 engine front side cover (one) lh or rh - r r
(left
and right).
- 7040D30 engine bay front beam cover - r r
.
- 7040D14 engine bay rear side cover (one) lh or rh - r r
(left
and right).
- 4450B12 front or rear wheels (two) - r+r
.
- 7055B54 under-engine guard - r r
.
- 1048A48 throttle heater sleeve - r r
.
- 1088E10 radiator cooling fan - r + r
.
- 1008C10 power unit upper reaction link r r
.
- 7055B42 Additional FRONT WHEEL ARCH (one), left or right
- R.R.
(left and right).
- 1092G10 single engine belt r r
.
- 1076B52 exhaust pipe (one) leaving l/h or r/h exhaust manifold
- r + r
(left and right).
- 1072C34 r/h exhaust manifold - r + r and replace seal
.
- 2110A10 manual gearbox and differential - r + r
.
- 1810A24 clutch - r + r with gearbox removed
.
1. At the bench, undo the bolts (1a) and remove the gearbox input
shaft cover (1b), complete with gasket.
Refitting
(
Removing
)
Fit the gearbox input shaft cover, complete
with gasket, and fix it using the bolts. | The matching surfaces of the main shaft cover and the thrust bearing should be lubricated with Molycote PG 21 type grease. |