3314515 - 2130C36 oil seal for lh differential shaft - r r (Automatic transmission)

Removing ( Refitting ) Position the vehicle on the ramp. Make sure that the ignition is OFF (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

NameConnector
-Battery  A1 
 - 4450B10  Front WHEEL (one) - R.R. (left)..  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (left).  - 7055B54  under-engine guard - r r . 1. Undo the bolts (1a) and disconnect the front left half shaft (1b) from the differential inner shaft.
The above bolts are treated with eslok anti-slackening material and must therefore be replaced whenever they are removed.
1. Remove the retainer (1a) and release the front right brake caliper flexible hose (1b) from its mounting bracket.2. Release the brake pad wear sensor cable (2a) and the front right wheel speed sensor cable (2b) from their mounting brackets.
1. Undo the bolt securing the anti-roll bar joint mounting bracket to the front shock absorber fork.2. Undo the bolt fixing the front shock absorber fork to the track control arm, shock absorber stem side.3. Undo the bolt fixing the front shock absorber fork to the track control arm, track control arm side.
Position a hydraulic jack under the hub steering knuckle.1. Undo the nut (1a) and disconnect the upper track control arm (1b) from the front hub steering knuckle using tool (1c).

NameCountry
1cExtractor1.821.169.000
1. Lower the hydraulic jack and remove the front shock absorber fork with track control arm.Move the steering knuckle/drive shaft assembly from the differential inner shaft.
1. Remove the automatic transmission differential inner half shaft (1a) using the tools (1b) and (1c).
Collect the automatic transmission fluid which leaks out into a suitable container.

NameCountry
1bCounter weight1.821.161.000

NameCountry
1cFlange1.820.229.000
1. Remove the differential shaft oil seal.
Refitting ( Removing ) 1. Fit the differential shaft oil seal (1a) using the tools (1b) and (1c).

NameCountry
1bFitting tool1.821.202.000

NameCountry
1cFitting tool1.821.201.000
Refit the automatic transmission differential inner half shaft in its seating.Replace the front shock absorber fork with track control arm in its housing.Raise the hydraulic jack placed under the steering knuckle.1. Connect the upper track control arm (1a) to the front steering knuckle and fix it tightening the nut (1b) to the recommended torque.

FasteningComponentØValue(daNm)
1bNutFRONT SUSPENSION TOP LEVERM10Front hub steering knuckle side 4.3 - 4.7
Remove the hydraulic jack from under the hub steering knuckle.1. Tighten the bolt fixing the front shock absorber fork to the track control arm, track control arm side to the recommended torque.

FasteningComponentØValue(daNm)
1BoltFRONT DAMPER FORK ON WISHBONEM12Lower track control arm side 8.6 - 9.6
2. Tighten the bolt securign the front shock absorber fork to the track control arm, shock absorber stem side.

FasteningComponentØValue(daNm)
2BoltFRONT DAMPER FORK ON WISHBONEM12Shock absorber side 11.7 - 12.9
3. Tighten the bolt securing the anti-roll bar joint mounting bracket to the front shock absorber fork.
Firx the brake pad wear sensor cable and the front right wheel speed sensor cable to their mounting brackets.Fix the front right brake caliper flexible hose to its mounting bracket and fit the retainer.1. Connect the front left half shaft (1a) to the differential inner shaft and tighten its bolts (1b) to the specified torque.
Fit the service tank protection on the left side and secure it with its bolt.

FasteningComponentØValue(daNm)
1bBoltFRONT DRIVE SHAFT COMPLETE WITH JOINTSM10Differential side 5.2 - 5.8
Top up the automatic transmission fluid level (refer to op.   2130A04  Automatic transmission FLUID - Check level and top up, .if necessary ).  - 7055B54  under-engine guard - r r .  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (left).  - 4450B10  Front WHEEL (one) - R.R. (left).. Connect the battery terminal (-).Remove the car from the ramp.