3314520 - 2135A12 gear engagement cable - r r (Automatic transmission)

Removing ( Refitting )  - 7040L20  tunnel trim - r r - 7040A65  passenger compartment box lock , one , r rMove the automatic transmission manual control leverl to the P position.1. Undo the attachments and remove the facia mounting bracket, passenger side.
1. Disconnect the gear engagement cable.2. Close the circlip ends, then withdraw the gear engagement cable from its seating and move it aside.
 - 1048A34  sleeve(s) from flow meter to air supply capacity case - r + r1. Remove the retainer (1a) and disconnect the gear engagement cable (1b) from the selector.2. Close the circlip ends, then withdraw the gear engagement cable from its seating.
1. Undo the nuts (1a) and remove the complete gear engagement cable (1b).
Refitting ( Removing ) Place the gear selector lever in position P.Refit the complete gear engagement cable in its seating and secure it with its nuts.1. Place the gear engagement cable in its support in the interior compartment and fit the circlip.2. Connect the gear engagement cable to the selector lever.
Place the gear selector lever in position P.1. Loosen the nuts fixing the end of the gear engagement cable to the ball joint.2. Place the gear engagement cable in its support in the engine compartment and fit the circlip.3. Align the ends of the gear engagement cable ball joint (3a) with the ball joint for the gear selector (3b), then connect them.Tighten the nuts fixing the end of the gear engagement cable to the ball joint to the recommended torque.

FasteningComponentØValue(daNm)
-NutGEAR ENGAGEMENT CABLEM5(Ball joint head side) 0.3 - 0.4
4. Fit the gear engagement cable clip (4).

Manouevre the gear selector lever and check that:

  • the click caused by the different positions of the gear selector can be heard in each selector position;
  • the signal on the instrument display corresponds to each selector position.
 - 1048A34  sleeve(s) from flow meter to air supply capacity case - r + rFit the facia mounting bracket, passenger side, and secure it. - 7040A65  passenger compartment box lock , one , r r - 7040L20  tunnel trim - r rConnect the negative (-) battery terminal.