4130B40 OUTLET PIPE FROM PUMP TO POWER STEERING CASE R R - Alfa - 166 - eLearn

3314642 - 4130B40 outlet pipe from pump to power steering case r r

) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

- 7040D12 engine front side cover (one) lh or rh - r r (Right and left). - 7040D30 engine bay front beam cover - r r . - 7040D14 engine bay rear side cover (one) lh or rh - r r (Right side). Draw off the fluid from the power assisted steering reservoir using a suitable syringe. - 7055B54 under-engine guard - r r . 1. Release the air conditioner compressor's electrical connections from the bracket on the power steering pump and move them away.2. Undo the connector (2a) and disconnect the supply pipe from the pump to the power assisted steering box (2b), power assisted steering box side.

- 4450B12 front or rear wheels (two) - r+r . - 7055B39 front additional wheel arch half (one), lh or rh, front element - r r (Right and left). - 7055B41 front supplementary wheel arch half (one), lh or rh, rear element r r (Right and left). 1. Release the supply pipe from the pump to the power steering box from the band on the power steering fluid reservoir mounting.

- 1076B52 exhaust pipe (one) leaving l/h or r/h exhaust manifold - r + r (Right and left). - 1084B30 engine oil filter r r . - 1092G10 single engine belt r r . - 1092G20 engine component single belt fixed tensioner - one - r + r . - 5530A14 alternator - r+r for versions with air conditioner . 1. Release the supply pipe from the pump to the power steering box from the band.

1. Undo the bolts (1a) and remove the power steering box heat shield (1b).2. Release the supply pipe from pump to power steering box from the bands.

1. Undo the bolt securing the supply pipe from pump to power steering box to the power steering box.2. Undo the connector (2a) and disconnect the supply pipe from the pump to the power assisted steering box (2b), power assisted steering box side.

1. Undo the nuts (1a) and disconnect the front anti-roll bar joints (1b) from the brackets.

1. Undo the bolts (1a) securing the front anti-roll bar brackets (1b) to the front suspension subframe.

1. Undo the bolts fixing the power assisted steering box to the front suspension frame.

1. Remove the delivery pipe from pump to power steering box and withdraw from the right front wheel-arch.

Refitting ( Removing

) Refit in its seating the delivery pipe from pump to power steering box.1. Tighten the bolts securing the power steering box to the front suspension subframe to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1	Nut	POWER STEERING BOX	M12	Front suspension frame side 10.5 - 11.5

1. Tighten the bolts securing the front anti-roll bar brackets to the front suspension frame to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Bolt	FRONT ANTI-ROLL BAR	M8	Front suspension frame side 2.7 - 2.9

1. Connect the front anti-roll bar joints (1a) to the brackets and tighten the nuts (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Nut	FRONT ANTI-ROLL BAR JOINTS	M10	(Shock absorber fork side) 3.8 ÷ 4.7

1. Connect the supply pipe from pump to power steering box (1a), power steering box side, and tighten the connector (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Connector	PIPE BTWN PUMP + POWER STEERING BOX	M16	(Power steering box side) 3.4 ÷ 3.8

2. Tighten the bolt securing the supply pipe from the pump to power steering box to the power steering box.

Secure the supply pipe from pump to power steering box with the bands.Refit in its seating the power steering box heat shield and tighten its bolts.Secure the supply pipe from the pump to the power assisted steering box with the band. - 5530A14 alternator - r+r for versions with air conditioner . - 1092G20 engine component single belt fixed tensioner - one - r + r . - 1092G10 single engine belt r r . - 1084B30 engine oil filter r r . - 1076B52 exhaust pipe (one) leaving l/h or r/h exhaust manifold - r + r (Right and left). Secure the supply pipe from pump to power steering box with the band on the power steering fluid reservoir mounting. - 7055B41 front supplementary wheel arch half (one), lh or rh, rear element r r (Right and left). - 7055B39 front additional wheel arch half (one), lh or rh, front element - r r (Right and left). - 4450B12 front or rear wheels (two) - r+r . 1. Connect the supply pipe from pump to power steering box (1a), power steering pump side, and tighten the connector (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Connector	PIPE BTWN PUMP + POWER STEERING BOX	M16	(Power steering pump side) 3.8 ÷ 4.2

2. Replace the air conditioner compressor's electrical connections back in their seatings and secure them to the bracket on the power steering pump.

- 7055B54 under-engine guard - r r . - 7040D14 engine bay rear side cover (one) lh or rh - r r (Right side). - 7040D30 engine bay front beam cover - r r . - 7040D12 engine front side cover (one) lh or rh - r r (Right and left). Connect the negative (-) battery terminalFill the power steering circuit with the recommended fluid.

	Type	Component	Name	Qty.
-	Fluid	POWER ASSISTED STEERING CIRCUIT	TUTELA GI/A	-

Bleed the power steering system as described belowWith the front wheels raised off the ground, with the engine switched off turn the steering wheel to full lock, left and right, 4-5 times. Check and, if necessary, top up the fluid level in the reservoir. Remove the car from the ramps.Start the engine and carry out 4 - 5 full steering wheel turn cycles (right and left). Top up the fluid level in the reservoir.