5510C48 TIMING SIDE KNOCK SENSOR - R+R - Alfa - 166 - eLearn

) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

- 7055B54 under-engine guard - r r . - 7040D12 engine front side cover (one) lh or rh - r r (left). - 7040D14 engine bay rear side cover (one) lh or rh - r r (left). - 1048B44 heat exchanger/manifold pipe - r r . - 1088C40 thermostat- r + r . - 1088C36 thermostat support - r + r . - 7055B39 front additional wheel arch half (one), lh or rh, front element - r r . - 1088D26 rigid intake pipe to water pump - r+r for versions with a/c . - 1072B42 left hand or right hand inlet manifold (one) - r+r . - 1072B12 intake manifold (one) lh or rh - r r and replace gasket (right) 1. Undo the bolt (1a) and remove the timing side knock sensor (1b).

) Fit the timing side knock sensor and fix it tightening the bolt to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	TIMING SIDE KNOCK SENSOR	M8	1.95 - 2.05

- 1072B12 intake manifold (one) lh or rh - r r and replace gasket (right) - 1072B42 left hand or right hand inlet manifold (one) - r+r . - 1088D26 rigid intake pipe to water pump - r+r for versions with a/c . - 7055B39 front additional wheel arch half (one), lh or rh, front element - r r . - 1088C36 thermostat support - r + r . - 1088C40 thermostat- r + r . - 1048B44 heat exchanger/manifold pipe - r r . - 7040D14 engine bay rear side cover (one) lh or rh - r r (left). - 7040D12 engine front side cover (one) lh or rh - r r (left). - 7055B54 under-engine guard - r r . Connect the negative (-) battery terminal.