3315515 - Introduction - MOULDING AND PROTECTION

GLOSSARY

Polypropylene

Crystalline thermoplastic resin obtained from the polymerization of propylene. This material is hard and tough, resistant to humidity, oils and solvents and withstands temperatures of up to 170° C.
1, RADIATOR SHIELD 2, SIDE FRONT GRILLE 3, REAR TRIMS 4, FRONT BUMPER 5, REAR BUMPER 6, FRONT WHEEL ARCH LINER 7, REAR WHEEL ARCH LINER

DESCRIPTION

The bumpers, made from polypropylene and colour matched with the body paintwork, make up an important element of the vehicle.Both bumpers contain soft impact resistant inserts.The housing for the number plate is a feature of the front bumper.The wheel housings are protected by special plastic shields.The shields in the front wheel housings consist of two half shells, to facilitate maintenance operations in the engine compartment.The lower part of the engine compartment is protected by a cover fixed to the chassis and the bumper by bolts; in the upper section there is a series of covers (5) which can be easily detached for maintenance operations.The other elements (grilles, badges, trims, etc.) are designed to enhance the spirit of the vehicle.