1032C32 FIXED TIMING SYSTEM TENSIONER (ONE) R + R (AUTOMATIC TRANSMISSION) - Alfa - 166 - eLearn

) - 7040D12 engine front side cover (one) lh or rh - r r . - 7040D14 engine bay rear side cover (one) lh or rh - r r . - 4450B10 Front WHEEL (one) - R.R. (right). - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. (right). - 1092A12 crankshaft pulley - r+r for versions with air conditioner . - 1032D12 timing system protective cover(s) - r + r - 1032B14 toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner . For the upper fixed tensioner, proceed as follows:1. Undo the bolts (1a) and remove the upper fixed timing belt tensioner (1b).For the lower fixed tensioner, proceed as follows:2. Undo the bolts (2a) and remove the lower fixed timing belt tensioner (2b).

) Fit the fixed timing belt tensioner and fix it tightening the bolt to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FIXED TENSIONER	M8	Front cover side/oil sump side 1.7 - 2.1

Carry out op. 1016A42 left hand cylinder head ignition coil cover - r+r . Carry out op. 1072B50 sleeves connecting air capacity box to inlet manifold is - r+r . Carry out op. 5510C14 ignition coil/s - r+r . Carry out op. 1016A36 left hand and right hand cam cover - r+r . - 1032B14 toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner . - 1016A36 left hand and right hand cam cover - r+r . - 5510C14 ignition coil/s - r+r . - 1072B50 sleeves connecting air capacity box to inlet manifold is - r+r . - 1016A42 left hand cylinder head ignition coil cover - r+r . - 1032D12 timing system protective cover(s) - r + r - 1092A12 crankshaft pulley - r+r for versions with air conditioner . - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. (right). - 4450B10 Front WHEEL (one) - R.R. (right). - 7040D14 engine bay rear side cover (one) lh or rh - r r . - 7040D12 engine front side cover (one) lh or rh - r r .