3314317 - 1076A70 heat shield for left catalytic preconverter r r (Automatic transmission)

Removing ( Refitting ) Place the vehicle on a ramp. Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (  - 5530B10  battery - r+r ).

NameConnector
-Battery  A1B 
Proceed with the removal  - 7040D12  engine front side cover (one) lh or rh - r r (Right and left sides). Proceed with the removal  - 7040D30  engine bay front beam cover - r r . 1. Undo the nut (1a) and release air conditioning system dehydrating filter (1b) from the mounting bracket.
1. Undo the bolts (1a) and remove air conditioning dehydrating filter bracket (1b).
1. Undo both upper nuts fixing the heat shield to the left catalytic preconverter.
Proceed with the removal  - 7055B54  under-engine guard - r r . Proceed with the removal  - 1080B92  left upper lambda sensor r r . 1. Undo the lower bolt fixing the left catalytic preconverter heat shield.2. Undo the nut and move the rear coolant inlet pipe to the radiator toward the radiator.
1. Remove the heat shield for the left catalytic converter.
Refitting ( Removing ) Place the catalytic preconverter heat shield back in its housing and secure it using the lower bolt.Refit the rigid coolant inlet pipe to the radiator and secure with nuts. Proceed with the refitting  - 1080B92  left upper lambda sensor r r . Proceed with the refitting  - 7055B54  under-engine guard - r r . Tighten both upper nuts securing the left catalytic preconverter heat shield.Place the air conditioning dehdrating filter mounting bracket back in its housing and fix it using the bolts.Place the air conditioning dehydrating filter back in its housing on the mounting bracket and fix it using the bolts. Proceed with the refitting  - 7040D30  engine bay front beam cover - r r . Proceed with the removal  - 7040D12  engine front side cover (one) lh or rh - r r (Right and left sides). Connect the battery terminal (-).Remove the car from the ramp.