3314481 - 2110C22 gear input shaft seals - r r
Removing ( Refitting ) - 7040D12 engine front side cover (one) lh or rh - r r (left and right). - 7040D30 engine bay front beam cover - r r . - 7040D14 engine bay rear side cover (one) lh or rh - r r (left and right). - 4450B12 front or rear wheels (two) - r+r . - 7055B54 under-engine guard - r r . - 1048A48 throttle heater sleeve - r r . - 1088E10 radiator cooling fan - r + r . - 1008C10 power unit upper reaction link r r . - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. (left and right). - 1092G10 single engine belt r r . - 1076B52 exhaust pipe (one) leaving l/h or r/h exhaust manifold - r + r (left and right). - 1072C34 r/h exhaust manifold - r + r and replace seal . - 2110A10 manual gearbox and differential - r + r . - 1810A24 clutch - r + r with gearbox removed . 1. At the bench, undo the bolts (1a) and remove the gearbox input shaft cover (1b), complete with gasket.
Refitting
(
Removing
)
Fit the gearbox input shaft cover, complete
with gasket, and fix it using the bolts.
The matching surfaces of the main shaft cover and the thrust bearing should be lubricated with Molycote PG 21 type grease. |