3314503 - 2130A22 cooling radiator of automatic transmission hydraulic circuit - r + r - including fluid level top up if necessary (Automatic transmission)

Removing ( Refitting ) Place the vehicle on a ramp. - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r .  - 7055A41  RIGHT FRONT GRILLE - R.R. .  - 7055A43  central front grille - r r .  - 7055B10  Front BUMPER - R.R. . 1. Undo the bolt (1a) and remove the bracket (1b) and disconnect the automatic transmission hydraulic circuit fluid inlet and outlet pipes (1c) from the radiator.
Recover the fluid in a suitable container.
2. Undo the bolt (2a) and move the air duct (2b) aside.3. Undo the bolts (3a) and remove the automatic transmission hydraulic circuit cooling radiator (3b).
Refitting ( Removing ) Fit the automatic transmission hydraulic circuit cooling radiator and fix it using the bolts.Place the air duct back in its housing and fix it using the lower bolt.Connect the fluid inlet and outlet pipes to the radiator and fix them with the bracket and the bolt. - 7055B10  Front BUMPER - R.R. .  - 7055A43  central front grille - r r .  - 7055A41  RIGHT FRONT GRILLE - R.R. .  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r .  - 7040D14  engine bay rear side cover (one) lh or rh - r r (left). Top up the automatic transmission hydraulic circuit using the recommended fluid.

TypeComponentNameQty.
-OilAUTOMATIC TRANSMISSION HYDRAULIC CIRCUIT--
 - 7040D14  engine bay rear side cover (one) lh or rh - r r (left). Remove the vehicle from the ramp.