3314512 - 2130B80 oil re-circulation pipe on electronic automatic transmission case - r r (Automatic transmission)

Removing ( Refitting ) Place the vehicle on a ramp. - 4450B10  Front WHEEL (one) - R.R. (left).  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (left). 1. Undo the bolt (1a) and remove the bracket (1b) securing the fluid recirculation pipe on the transmission casing.2. Undo the connector (2a) complete with seal (2b) and remove the fluid recirculation pipe on the electronic automatic transmission casing (2c).
Collect the automatic transmission fluid which leaks out in a suitable container.
3. Remove the O-Ring seal.
Refitting ( Removing ) 1. Refit the O-Ring in its seating.2. Fit the fluid recirculation pipe on the electronic automatic transmission casing (2a) and fix it with its connector (2b) complete with seal, tightened to the specified torque.

FasteningComponentØValue(daNm)
2bConnectorAUTO TRANS GEARBOX CASING OIL RECIRCULATION PIPE.....--
3. Fit the bracket (3a) securing the fluid recirculation pipe on the transmission casing and fix it with its bolt (3b).
 - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (left).  - 4450B10  Front WHEEL (one) - R.R. (left). Top up the automatic transmission fluid level (refer to op.   2130A04  Automatic transmission FLUID - Check level and top up, .if necessary ). Remove the vehicle from the ramp.