2130B82 SEALING PLUGS ON OIL DUCTS ON ELECTRONIC AUTOMATIC TRANSMISSION CASE REPLACE (AUTOMATIC TRANSMISSION) - Alfa - 166 - eLearn

3314513 - 2130B82 sealing plugs on oil ducts on electronic automatic transmission case replace (Automatic transmission)

) Place the vehicle on a ramp. Make sure that the ignition is in the OFF position, then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1

- 4450B10 Front WHEEL (one) - R.R. (left). - 7055B39 front additional wheel arch half (one), lh or rh, front element - r r (left). - 7055B54 under-engine guard - r r . - 1008A43 power unit rigid mount - automatic transmission side - r r . 1. Unscrew the plugs on the electronic automatic transmission casing oil pipes (1a) complete with seals (1b).

Collect the automatic transmission fluid which leaks out into a suitable container.

Refitting ( Removing

) Tighten the plugs on the electronic automatic transmission casing pipes complete with seals, to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Plug	ELECT. AUTO. TRANS. GEARBOX CASING OIL SEALING PLUGS.....	-	-

- 1008A43 power unit rigid mount - automatic transmission side - r r . - 7055B54 under-engine guard - r r . - 7055B39 front additional wheel arch half (one), lh or rh, front element - r r (left). - 4450B10 Front WHEEL (one) - R.R. (left). Top up the automatic transmission fluid level (refer to op. 2130A04 Automatic transmission FLUID - Check level and top up, .if necessary ). Connect the negative (-) battery terminal.Remove the vehicle from the ramp.