3314519 - 2135A10 automatic transmission manual control lever and support - r + r and overhaul (Automatic transmission)

Removing ( Refitting ) Make sure that the ignition is in the OFF position, then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

	Name	Connector
-	Battery	A1

 - 7040L20  tunnel trim - r r .  - 7040A65  passenger compartment box lock , one , r r . Move the automatic transmission manual control lever to the P position.1. Undo the attachments and remove the facia mounting bracket, passenger side. 1. Disconnect the gear engagement cable.2. Close the circlip ends, then withdraw the gear engagement cable from its seating and move it aside. 1. Undo the bolts (1a) and nuts(1b), then move aside the mounting and automatic transmission manual control lever (1c).Disconnect the wiring connection.

	Name	Connector
-	Data not available yet	-

Remove the mounting and automatic transmission manual control lever. Refitting ( Removing ) Refit the mounting and automatic transmission manual control lever in their seating.Connect the electrical connection.Tighten the nuts and bolt fixing the manual control lever and support.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	AUTO TRANS LEVER SUPPORT	M6	Bodyshell side 0.6 - 0.8

	Fastening	Component	Ø	Value(daNm)
-	Nut	AUTO TRANS LEVER SUPPORT	M6	Bodyshell side 0.6 - 0.8

Refit the gear engagement cable in its seating and connect it.Fit the facia mounting bracket, passenger side, and secure it. - 7040A65  passenger compartment box lock , one , r r .  - 7040L20  tunnel trim - r rConnect the negative (-) battery terminal.