3310A62 FRONT BRAKE PADS - REPLACE WITH WHEELS REMOVED - Alfa - 166 - eLearn

3314554 - 3310A62 front brake pads - replace with wheels removed

) Clean the brake pad surfaces in contact with the brake calipers.1. Apply a thin layer of the recommended grease on the circular surfaces in contact with the pistons (1a) and the side surfaces of the metal support (1b).

	Type	Component	Name	Qty.
1a	Grease	FRONT BRAKE PADS	MOLYKOTE CU - 7439 PLUS	-

	Type	Component	Name	Qty.
1b	Grease	FRONT BRAKE PADS	MOLYKOTE CU - 7439 PLUS	-

Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connections on the brake pad wear warning light cables.

	Name	Connector
1	Left brake pad wear sensor (switch)	K20

	Name	Connector
1	Right brake pad wear sensor (switch)	K21

2. Withdraw the bolts (2a) and remove the clips (2b).

1. Withdraw and remove the front brake pads.

Refitting ( Removing

) Push back the brake caliper pistons and fit the front brake pads.Fit the bottom bolt, then fit the clip and secure it with the top bolt.Connect the electrical connections of the brake pad wear warning light cables.Connect the negative (-) battery terminal.