3314727 - 5010B45 duct from climate control system - r r

Removing ( Refitting ) - 7045A10 l/h or r/h front seat (one) - r+r .  - 7040L20  tunnel trim - r r .  - 7040L40  front compartment scuff strip - r r . Only for operations to the right hand side duct. - 1056B79  injection/ignition contro unit guard - r r . 1. Undo the bolts fixing the side console cover.2. Remove the side console cover. Only for operations on the left hand side duct.Undo the two bolts fixing the driver's footrest and remove it.Remove the rubber protection and accelerator pedal travel stop.Move the floor covering aside. 3. Undo the bolts (3a) and remove the climate control unit mounting bracket (3b).4. Disconnect and remove the air duct for the rear places coming out of the climate control casing after having removed the front end from the crossmember under the front seat. Refitting ( Removing ) Place the air duct for the rear places coming out of the climate control casing back in its housing.Fit the climate control unit mounting bracket and fix it using the bolts. Only for operations on the left hand side duct.Put the floor carpet back in place.Fit the accelerator pedal travel stop complete with rubber protector.Fit the driver's footrest and fix it using the two fixing bolts. Fit the side console cover and fix it using the bolts. Only for operations on the right hand side duct. - 1056B79  injection/ignition contro unit guard - r r .  - 7040L40  front compartment scuff strip - r r .  - 7040L20  tunnel trim - r r . - 7045A10 l/h or r/h front seat (one) - r+r .