3314798 - 5040D70 air distribution flap control motor with facia removed

Removing ( Refitting )  - 5010B52  ducts (one), lh or rh, on air distribution unit for air duct beneath facia r r with facia removed . 1. Disconnect the electrical connection for the distribution air flap actuator.

	Name	Connector
1	Air distribution flap actuator (motor)	N80

2. Undo the fixing bolts and move the distribution air flap actuator aside.3. Undo the bolts (3a) and remove the actuator mounting bracket (3b).4. Release the wiring and remove the distribution air flap actuator. Refitting ( Removing ) Position the electrical wiring, then fit the actuator mounting bracket and fix it using the bolts.Place the distribution air flap actuator back in its housing and fix it using the bolts.

Check that the actuator and the flap operating pin are correctly matched.

Connect the electrical connection for the distribution air flap actuator. - 5010B52  ducts (one), lh or rh, on air distribution unit for air duct beneath facia r r with facia removed .