3314811 - 5050B38 windscreen wiper assembly - r+r or repair

Removing ( Refitting ) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

	Name	Connector
-	Battery	A1B

 - 5050B34  windscreen wiper arm/s complete with blade - r+r .  - 7055A18  Windscreen base TRIM - R.R. . 1. Undo the nut (1a) fixing the motor bearing to the idler arm and rotate the levers (1b) to allow the removal of the assembly.2. Undo the bolts and the nut fixing the front windscreen wiper assembly.3. Move the front windscreen wiper assembly aside and disconnect the electrical connections from the motor.

	Name	Connector
3	Windscreen wiper motor	N15

4. Remove the front windscreen wiper assembly. Refitting ( Removing ) Connect the electrical connections to the motor.Place the front windscreen wiper assembly back in its housing and fix it using the bolts and the nut.Check that the motor is working properly.Place the motor in the rest position.1. In order to ensure that the travel of the windscreen wiper arms is correct, the idler arm (1a) must be fixed to the motor bearing, with the opening (1b) in the linkage aligned with the bearing (1c) and the bolt (1d).

Since the action of tightening the nut causes the partial rotation of the linkage, before fitting the wiper arms, check that the motor is in the rest position.

 - 7055A18  Windscreen base TRIM - R.R. .  - 5050B34  windscreen wiper arm/s complete with blade - r+r .