5510C18 RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R - Alfa - 166 - eLearn

3314838 - 5510C18 right hand cylinder head ignition coil - r+r

) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

- 1048A48 throttle heater sleeve - r r . - 1072B50 sleeves connecting air capacity box to inlet manifold is - r+r . 1. Disconnect the electrical connections from the ignition coils.

	Name	Connector
1	Ignition coil	A30

2. Undo the bolts (2a) and remove the electrical wiring securing brackets (2b).Move the electrical wiring to the side.

1. Undo the remaining fixing bolts (1a) and remove the ignition coils (1b).

Refitting ( Removing

) Fit the ignition coils and fix them using the bolts.Place the electrical wiring back in its housing.Connect the electrical connections to the ignition coils. - 1072B50 sleeves connecting air capacity box to inlet manifold is - r+r . - 1048A48 throttle heater sleeve - r r . Connect the negative (-) battery terminal.