3314841 - 5510C46 flywheel side knock sensor - r+r

Removing ( Refitting ) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

	Name	Connector
-	Battery	A1B

 - 7055B54  under-engine guard - r r .  - 7040D12  engine front side cover (one) lh or rh - r r (left).  - 7040D14  engine bay rear side cover (one) lh or rh - r r (left).  - 1048B44  heat exchanger/manifold pipe - r r .  - 1088C40  thermostat- r + r .  - 1088C36  thermostat support - r + r .  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r .  - 1088D26  rigid intake pipe to water pump - r+r for versions with a/c . 1. Undo the bolt (1a) and remove the flywheel side knock sensor (1b). Refitting ( Removing ) Fit the flywheel side knock sensor and fix it tightening the bolt to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FLYWHEEL SIDE KNOCK SENSOR	M8	1.95 - 2.05

 - 1088D26  rigid intake pipe to water pump - r+r for versions with a/c .  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r .  - 1088C36  thermostat support - r + r .  - 1088C40  thermostat- r + r .  - 1048B44  heat exchanger/manifold pipe - r r .  - 7040D14  engine bay rear side cover (one) lh or rh - r r (left).  - 7040D12  engine front side cover (one) lh or rh - r r (left).  - 7055B54  under-engine guard - r r . Connect the negative (-) battery terminal.