3314844 - 5510D10 spark plugs - r+r

Removing ( Refitting ) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

	Name	Connector
-	Battery	A1B

 - 1016A42  left hand cylinder head ignition coil cover - r+r .  - 5510C16  left hand cylinder head ignition coil - r+r .  - 1048A48  throttle heater sleeve - r r .  - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r .  - 5510C18  right hand cylinder head ignition coil - r+r . Blow through with compressed air in spark plug openings and remove any impurities or traces of dirt.With the engine cold, remove the spark plugs.Check the condition of the spark plugs and, when necessary, replace them.

Using different spark plugs from those recommended can cause damage to the engine and alter the exhaust emission levels.

Refitting ( Removing ) Fit the spark plugs and tighten them to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	SPARK PLUGS	M14	Cylinder head side 2.7 - 3.4

 - 5510C18  right hand cylinder head ignition coil - r+r .  - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r .  - 1048A48  throttle heater sleeve - r r .  - 5510C16  left hand cylinder head ignition coil - r+r .  - 1016A42  left hand cylinder head ignition coil cover - r+r . Connect the negative (-) battery terminal.