5540A56 DIPPED/MAIN BEAM ELECTRICAL WIRING - CHECK COMPONENT OPERATION, LINE CONTINUITY AND REPAIR CONTACTS - INCLUDES RELAY REPLACEMENT IF NECESSARY - Alfa - 166 - eLearn

3314868 - 5540A56 dipped/main beam electrical wiring - check component operation, line continuity and repair contacts - includes relay replacement if necessary

) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

1. Undo the knob (1b) and open the protective cover (1a).

1. Disconnect the electrical connections from the rear light cluster.

	Name	Connector
1	Rear left light cluster	F30

	Name	Connector
1	Rear right light cluster	F31

2. Undo the nuts (2a) and remove the outer rear light cluster (2b).

Refitting ( Removing

) Place the outer rear light cluster back in its housing and fix it using the nuts.Connect the electrical connections to the outer rear light cluster.Close the protective cover and fix it using the knob.Connect the negative (-) battery terminal.