5580E12 IMMOBILISER DEVICE ECU - R+R FOLLOWING ELECTRIC CIRCUIT CHECK - Alfa - 166 - eLearn

3314944 - 5580E12 immobiliser device ecu - r+r following electric circuit check

) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

1. Unscrew bolt (1a) and open fuse access cover (1b).2. Undo the nuts (2a) and remove the electronic key anti-theft control unit (2b) after having disconnected the electrical connections (2c) and (2d).

	Name	Connector
2c	CODE control unit	M20B

	Name	Connector
2d	CODE control unit	M20A

Refitting ( Removing

) Connect the electrical connections to the electronic key anti-theft control unit, then place it back in its housing and fix it using the nuts.Close the fuse access cover and secure using the appropriate bolt.Connect the negative (-) battery terminal.