3315288 - 7055A80 rear ornament - r r
Removing ( Refitting ) 1. Open the boot lid and remove the trim retaining studs.
1. Lower the interior trim and disconnect the link from the lock
barrel.
1. Turn crest (1a) and prise out both plugs (1b) protecting the
retaining bolts.2. Use a drift to unscrew both self-tapping screws (2a) securing
crest (2b) and remove.
Refitting
(
Removing
)
Ensure the lock barrel and
crest are undamaged.Fit the retaining clip into its seat.Fit the lock barrel into its seat until
the groove engages with the retaining clips.Fit the lock barrel assembly and secure
using two new self-tapping screws.Connect the catch link.Test the lock barrel to ensure it works
properly.Refit the inner trim and secure by means
of studs.