| | Results of the tests |
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|
| Preliminarily
check the manual operation of the central locking |
Continue to Step
1
| Central locking not working,
not even manually |
See table
P10
|
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|
| Connect
diagnostic equipment (Examiner or other instruments) to the diagnostic
socket.Check that there are no faults in the alarm receiver |
Continue to Step
2
| Error detected in the
receiver | Continue
following the instructions for the diagnostic equipment |
| Dialogue failure of the diagnostic equipment between
the control unit and the receiver |
Restore the connection between the control unit and the
diagnostic connector (
See E7015 ALARM
).
|
| 2 | HECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | End of diagnosis | Fault persists | Search for the
fault starting from another symptom' |