3308611 - D31 ENGINE OVERHEATING / WITH FAN NOT WORKING
The reading on the instrument in the panel shows a high engine coolant temperature and the cooling fan does not come on If not (the fan comes on normally) See table D30 ENGINE OVERHEATING| Results of the tests | ||||
| 1 | CHECK OPERATION OF COOLING FAN | All OK | Problems met | Operation |
|---|---|---|---|---|
| Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket and carry out active diagnosis on the engine cooling fans: (in the engine management control unit ambient) | Continue to Step 4 | Fault in electric fan operation | Continue to Step 2 | |
| 2 | CHECK ELECTRIC FAN(S) | All OK | Problems met | Operation |
| 2.0 TS | Check the condition and correct operation of the engine cooling fan | Continue to Step 3 | Electric fan faulty | Replace electric fan Op. 1088E10 |
| 2.0 TB 2.5 V6 3.0 V6 2.5 V6 CAE 3.0 V6 CAE 2.4 JTD 10v | Check the condition and correct operation of the engine cooling fans | Continue to Step 3 | Electric fans faulty | Replace electric fans Op. 1088E11 |
| 3 | FAN OPERATING CIRCUIT CHECK | All OK | Problems met | Operation |
Check, in order:
| Continue to Step 4 | Connections not correct | Restore connections | |
| Component defective | Replace the component involved (if a fuse is involved, search for the cause of the problem) | |||
| 4 | HECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Search for the fault starting from another symptom' | |