| | Results of the tests |
| 1 | CHECK CLUTCH SWITCH | All OK | Problems met | Operation |
|---|
| Check
that the clutch pedal switch is working properly |
Continue to Step
2
| Lack of continuity |
Replace the clutch pedal
switch
Op. 5580A38 |
| 2 | CHECK CONNECTIONS TO ENGINE MANAGEMENT
CONTROL UNIT | All
OK | Problems
met | Operation |
|---|
|
With
the ignition on and clutch pedal depressed, check that there is
a voltage signal from the clutch switch to the engine management
control unit (
See E5060 CRUISE CONTROL
)
|
Continue to Step
3
| No voltage found | Restore connections |
| 3 | CHECK ENGINE MANAGEMENT CONTROL
UNIT | All
OK | Problems
met | Operation |
|---|
| Check
the operation of the engine management control unit |
Continue to Step
4
| Engine management control
unit faulty |
Replace engine management control unit
Op. 1056B82 |
| 4 | HECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | End of diagnosis | Fault persists | Search for the
fault starting from another symptom' |