| | Results of the tests |
| 1 | CHECK CONTROL CABLE TRAVEL | All OK | Problems met | Operation |
|---|
| Check
that the return travel of the control cables is unhindered |
Continue to Step
2
| Control cables do not
run freely | Restore correct operation |
| Cable damaged or broken |
Replace the cable
Op. 3380A30 |
| Linkage damage or broken |
Replace the linkage
Op. 3380A38 |
| Guard damaged or broken |
Replace the guard
Op. 3380A44 |
| 2 | CHECK OPERATING LEVER BUTTON | All OK | Problems met | Operation |
|---|
| Check
that the operating lever release button returns freely |
Continue to Step
3
| Incorrect adjustment |
Remove and release the button;
replace the operating lever if necessary
Op. 3380A10 |
| 3 | CHECKING ATTACHMENT OF CABLE TO
REAR BRAKE | All
OK | Problems
met | Operation |
|---|
| Check
that the cable is attached correctly to the rear brake caliper |
Continue to Step
4
| Cable attached incorrectly |
Restore the correct attachment
of the cable to the brake caliper
Op. 3380A30 |
| 4 | CHECK EFFICIENCY OF REAR BRAKE SELF-ADJUSTER | All OK | Problems met | Operation |
|---|
|
Check
the efficiency of the rear brake self-adjuster:
See Test 3380AA Check handbrake setting |
Continue to Step
5
| Faulty brake play take-up
device |
Replace
the rear brake caliper concerned
Op. 3310B34 |
| 5 | HECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | End of diagnosis | Fault persists | Search for the
fault starting from another symptom' |