3308747 - X12 ENGINE OIL LEAKS

A leak of engine oil can be seen with dripping and/or fouling of the engine
Results of the tests
0PRELIMINARY CHECKSAll OKProblems metOperation
Preliminarily carry out a visual inspect to locate the component or area which is leaking.If the visual inspection is not sufficient, wash the engine, dry it and cover the parts involved in talc: road test the vehicle to identify the leakNo leak identified: Continue to Step 1 Leak identifiedMove on directly to the step involved
1DRAIN PLUG CHECKAll OKProblems metOperation
Check the condition and the seal of the oil drain plug Continue to Step 2 Tightening of drain plug not correct Restore the correct tightening Op.   1020A30 
2OIL SUMP CHECKAll OKProblems metOperation

Verify:

  • the condition of the oil sump,
  • the seal of the sealant between the sump and the crankcase
  • that the bolts fixing the sump are correctly tightened
Continue to Step 3 Oil sump damaged or distorted Replace the oil sump Op.   1020A20 
Lack of sealant or tightening not correct Restore the correct tightening Op.   1020A20 
3OIL FILTER CHECKAll OKProblems metOperation

Verify:

  • the condition of the oil filter
  • the seal and condition of the gasket
Continue to Step 4 Oil filter damaged or distorted Replace the oil filter and the gasket Op.   1084B30 
4OIL PRESSURE RELIEF VALVE CHECKAll OKProblems metOperation
Check the condition of the oil pump pressure relief valve Continue to Step 5 Valve stuck in closed position Replace the oil pump Op.   1084B16 
5ENGINE GASKETS CHECKAll OKProblems metOperation
Gain access to the crankshaft and camshaft gasketsCheck the seal of these gaskets Continue to Step 6 Crankshaft gaskets damagedReplace the gaskets involved (see ENGINE OVERHAUL, Subassembly 1024)
Camshaft gaskets damagedReplace the gaskets involved (see ENGINE OVERHAUL, Subassembly 1036)
6HECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisFault persistsSearch for the fault starting from another symptom'