3314283 - 1084C34 engine oil cooling radiator - r + r (Automatic transmission)

Removing ( Refitting ) Position the vehicle on the ramp. - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r .  - 7055A43  central front grille - r r .  - 7055A41  RIGHT FRONT GRILLE - R.R. .  - 7055B10  Front BUMPER - R.R. . 1. Undo the bolt (1a) and remove the bracket (1b).2. Undo the bolts (2a) and disconnect the engine oil supply and return pipes (2b) from the engine cooling radiator.

Recover the engine oil which comes out in a suitable container.

3. Undo the bolts (3a) and remove the engine cooling radiator (3b). Refitting ( Removing ) Fit the engine cooling radiator and fix it using the bolts.Connect the engine oil supply and return pipes to the engine cooling radiator and fix them using the bolts.Fit the bracket and fix it using the bolt. - 7055B10  Front BUMPER - R.R. .  - 7055A41  RIGHT FRONT GRILLE - R.R. .  - 7055A43  central front grille - r r .  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r . Top up the engine oil lubrication circuit using the recommended oil.

	Type	Component	Name	Qty.
-	Oil	ENGINE LUBRICATION CIRCUIT	Selenia turbodiesel	-

Remove the vehicle from the ramp. Removing ( Refitting ) Position the vehicle on the ramp. Ensure that the ignition key is in the stop OFF, then disconnect the battery negative terminal  - 5530B10  battery - r+r .

	Name	Connector
-	Battery	A1B

Proceed with the removal  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (Right and left sides). Proceed with the removal  - 7055A41  RIGHT FRONT GRILLE - R.R. (Right and left sides). Proceed with removal  - 7055A43  central front grille - r r . Proceed with removal  - 7055B10  Front BUMPER - R.R. . 1. Undo the nut (1a) and remove the bracket (1b) fixing the engine oil supply and return pipes to the cooling radiator.2. Undo the bolts (2a) and disconnect the engine oil supply and return pipes to the cooling radiator (2b).

Recover the engine oil which comes out in a suitable container.

1. Undo the bolts (1a) and remove the engine oil cooling radiator (1b). Refitting ( Removing ) Place the engine oil cooling radiator back in its housing and fix it using the bolts.Connect the engine oil supply and return pipes to the engine oil cooling radiator and fix them using the bolts.Fit the bracket fixing the engine oil supply and return pipes to the cooling radiator and fix them using the nut. Proceed with the removal  - 7055B10  Front BUMPER - R.R. . Proceed with the removal  - 7055A43  central front grille - r r . Proceed with the refitting  - 7055A41  RIGHT FRONT GRILLE - R.R. (Right and left sides). Proceed with the refitting  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (Right and left sides). Connect the negative (-) battery terminal.Top up the engine oil lubrication circuit using the recommended oil.

	Type	Component	Name	Qty.
-	Oli [l]	ENGINE LUBRICATION CIRCUIT	SELENIA TURBO DIESEL	-

For the optimum operation of the engine in particularly harsh climatic conditions, use the recommended oil for the engine lubrication circuit.

	Type	Component	Name	Qty.
-	Oli [l]	ENGINE LUBRICATION CIRCUIT	SELENIA WR DIESEL	-

Remove the car from the ramps.