3314289 - 1088E11 fans with single engine duct - r+r

Removing ( Refitting ) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

NameConnector
-Battery  A1B 
 - 7040D12  engine front side cover (one) lh or rh - r r (right and left).  - 7040D30  engine bay front beam cover - r r . 1. Disconnect the electrical connections for the engine radiator fan resistances (1a) and (1b).

NameConnector
1aEngine fan adjustment resistor  O10 

NameConnector
1bEngine fan adjustment resistor  O12 
2. Disconnect the electrical connections from the engine cooling fans (2a) and (2b).

NameConnector
2aEngine electric fan motor  N11 

NameConnector
2bEngine electric fan motor  N12 
3. Release the electrical wiring from the securing bands.
1. Undo the bolts (1a) and remove the fans with the single cooling duct (1b).
Refitting ( Removing ) Fit the electric fans with the single cooling duct and fix them using the bolts.Fix the electrical wiring using the bands.Connect the electrical connections to the engine cooling fans.Connect the electrical connections to the engine radiator fan resistances. - 7040D30  engine bay front beam cover - r r .  - 7040D12  engine front side cover (one) lh or rh - r r (right and left). Connect the negative (-) battery terminal.