3314354 - 1060E30 pressure pump pulley - r r
Removing
(
Refitting
)
Position the vehicle on the ramp. - 7040D14 engine bay rear side cover (one) lh or rh - r r
(left).
- 7040D12 engine front side cover (one) lh or rh - r r
(left).
- 4450B10 Front WHEEL (one) - R.R.
.
- 7055B42 Additional FRONT WHEEL ARCH (one), left or right
- R.R.
(right)
- 1092G10 single engine belt r r
.
- 7055B54 under-engine guard - r r
.
- 1092A12 crankshaft pulley - r+r for versions with air conditioner
.
- 1092G20 engine component single belt fixed tensioner - one
- r + r
.
- 1008C10 power unit upper reaction link r r
.
- 1008C16 body link bracket - r r
.
- 1032B14 toothed timing belt - r + r for timing adjustment
or replacement versions with air conditioner
.
1. Screw two bolts in the appropriate seats to stop the rotation
of the pressure pump pulley.2. Undo the bolts (2a) and remove the safety flange (2b).3. Undo the pressure pump pulley nut.Remove the two bolts used to stop the rotation
of the pressure pump pulley.
 | Name | Country |
|---|---|---|
| 1b | Extractor | 1.860.954.002 |
Refitting
(
Removing
)
1. Fit the pressure pump drive pulley.Screw two bolts in the appropriate seats
to stop the rotation of the pressure pump pulley.2. Tighten the pressure pump pulley nut (2a) to the specified torque
using the tool (2b). | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 2a | Nut | PRESSURE PUMP CONTROL PULLEY | M14 | Pressure pump side 4.3 - 5.3 |
| Name | Country |
|---|---|---|
| 2b | Key | 1.822.138.000 |
