3314481 - 2110C22 gear input shaft seals - r r
Removing
(
Refitting
)
- 7040D12 engine front side cover (one) lh or rh - r r
(left
and right).
- 7040D30 engine bay front beam cover - r r
.
- 7040D14 engine bay rear side cover (one) lh or rh - r r
(left
and right).
- 4450B12 front or rear wheels (two) - r+r
.
- 7055B42 Additional FRONT WHEEL ARCH (one), left or right
- R.R.
(left).
- 7055B39 front additional wheel arch half (one), lh or rh,
front element - r r
(right)
- 7055A43 central front grille - r r
.
- 7055A41 RIGHT FRONT GRILLE - R.R.
.
- 7055B10 Front BUMPER - R.R.
.
- 7055B54 under-engine guard - r r
.
- 1076B50 exhaust pipe attachment to engine - r + r
.
- 2110A10 manual gearbox and differential - r + r
.
- 1810A24 clutch - r + r with gearbox removed
.
1. At the bench, undo the bolts (1a) and remove the gearbox input
shaft cover (1b), complete with gasket.
Refitting
(
Removing
)
Fit the gearbox input shaft cover, complete
with gasket, and fix it using the bolts. | The matching surfaces of the main shaft cover and the thrust bearing should be lubricated with Molycote PG 21 type grease. |