3314598 - 3340B52 pump/central obs pipe - r r
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	Position the vehicle on the
lift.
                                          Make sure that the ignition is off (STOP
position), then disconnect the negative battery terminal (refer
to op. 
                                            5530B10  battery - r+r
                                           ).
		)
	Position the vehicle on the
lift.
                                          Make sure that the ignition is off (STOP
position), then disconnect the negative battery terminal (refer
to op. 
                                            5530B10  battery - r+r
                                           ).
                                       |  | Name | Connector | 
|---|---|---|
| - | Battery | A1B | 
|  | Name | Connector | 
|---|---|---|
| 1 | Left. front wheel sensor for ABS | K70 | 
|  | Name | Connector | 
|---|---|---|
| 2b | Data not available yet | - | 
|  | Name | Connector | 
|---|---|---|
| 2c | Data not available yet | - | 


 Refitting
		(
		Removing
Refitting
		(
		Removing )
	Refit in its seating the rigid
pipe from master cylinder to hydraulic control unit.Connect the rigid pipe from master cylinder
to hydraulic control unit and tighten the connector to the specified
torque.
		)
	Refit in its seating the rigid
pipe from master cylinder to hydraulic control unit.Connect the rigid pipe from master cylinder
to hydraulic control unit and tighten the connector to the specified
torque.|  | Fastening | Component | Ø | Value(daNm) | 
|---|---|---|---|---|
| - | Connector | PIPE FROM PUMP TO HYDRAULIC CONTROL UNIT | M10 | Brake master cylinder side 1.2 - 1.5 |